静电系统及应用(StaticBond Charging Systems & Applicators)
SB-30A 型静电充电电源(StaticBond SB-30A Electro-Static Charging Power Supply)
The SB-30A is a state-of-the-art 150W 30kV DC power supply designed to temporarily bond materials together using electrostatic charging applicators. The programmable output of the supply ranges from zero to greater than full-scale rating (30kV potential and 5.0mA current).
SB-30A 是一种十分完美的150W 30KV 直流电源,设计用于暂时将原料进行静电粘合,电源输出范围是从0到大于额定满电压范围(30KV和0.5mA电流)内可编程
Download Spec Sheet
SB-20A 型静电充电电源(StaticBond SB-20A Electro-Static Charging Power Supply)
SB-20A Charging Generator is suitable for use in high voltage charging applications with DC charging bars. The unit’s output voltage and protection current value are set digitally by using the front panel. The output voltage can be set between 0kV-20kV and current can be set between 0-1000uA. The power supply includes remote on/off and remote voltage and adjustment settings and is available as positive or negative
SB-20A 充电器电源适合使用于带直流充电杆的高压充应用电场合。设备的输出电压和保护电流值可通过前置面板进行数字设定,输出电压可以设定在0KV-20KV范围,输出电流可设定在0-1000uA范围。电源包含远程开关(on/off )和远程电压设定,可以将电压设定成正电压或负电压。
Download Spec Sheet
快速静电清理器(Static Clean FastTack)
Electrostatic Edge Pinning on Converting and Extruding Machines. Static Clean’s Edge Pinner Charging Applicator on converting machines (like bag making) applies a static charge to extruded film as it contacts the chill roll. The static charge effectively prevents ‘neck-in’ of the film.在旋转和挤压机器的设备边沿静电会累积,静电清理边沿扣针在旋转设备中就应用而生(象制袋一样),这时的静电产生于胶片的挤压成型,因为它和冷轧辊充分接触,静电大量累积会导致胶卷的“内缩”
Download Spec Sheet
静电清理针扣爪(Static Clean Pinner Talon)
Electrostatic Edge Pinning on Converting and Extruding Machines. Static Clean’s Edge Pinner Charging Applicator on converting machines (like bag making) applies a static charge to extruded film as it contacts the chill roll. The static charge effectively prevents ‘neck-in’ of the film.在旋转和挤压机器的设备边沿静电会累积,静电清理边沿扣针在旋转设备中就应用而生(象制袋一样),这时的静电产生于胶片的挤压成型,因为它和冷轧辊充分接触,静电大量累积会导致胶卷的“内缩”
Download Spec Sheet
SBCB400弧形电阻充装棒(SBCB4000 Arc Resistant Charging Bar)
Resistively Coupled Charging Bars are used when materials need to be temporarily bonded to each other or to different materials including metals in various manufacturing applications. Some of these applications, which are common include Converting, Printing, Bindery, In-Mold Labeling, Roll Changeover on Winders, Laminating and Bonding of multiple webs, Edge Pinning, Card Stacking and a host of other applications that require induced static to assist in the process.
Download Spec Sheet
StaticBond Spot Charger
Arcing can cause a multitude of problems such as EMI interference, shutdown of production lines and personnel injury due to surprise from electrical shock. Resistance to arcing means that the Pinner applicators continuously supply static charge. This feature makes them easier and safer to set up and use. The Pinner also produces superior bonding compared to less sophisticated applicators. The Pinner applicators are also available in a non-current limited version for less sensitive areas.
Download Spec Sheet